| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| FIRST LEG END WIDTH | 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.193 INCHES MINIMUM AND 0.225 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.234 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE AND TAPERED |
| FIRST LEG THICKNESS | 0.048 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
| FIRST LEG WIDTH | 0.486 INCHES MINIMUM AND 0.516 INCHES MAXIMUM |
| FIRST LEG LENGTH | 0.859 INCHES MINIMUM AND 0.891 INCHES MAXIMUM |
| MATERIAL | STEEL COMP 1009 |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.136 INCHES MINIMUM AND 0.168 INCHES MAXIMUM |
| SECOND LEG LENGTH | 0.421 INCHES MINIMUM AND 0.453 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.140 INCHES MINIMUM AND 0.172 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.171 INCHES MINIMUM AND 0.203 INCHES MAXIMUM |
| SECOND LEG THICKNESS | 0.048 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
| SECOND LEG WIDTH | 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-P-12011,CLASS RSC MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | ZINC |