| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG THICKNESS | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| FIRST LEG WIDTH | 0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM |
| FIRST LEG LENGTH | 3.359 INCHES MINIMUM AND 3.391 INCHES MAXIMUM |
| FIRST LEG STYLE | SQUARE |
| HEAT TREATMENT | H-32 STRAIN HARDENED |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/8,H32 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 5052 |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.297 INCHES MINIMUM AND 0.328 INCHES MAXIMUM |
| SECOND LEG SLOT LENGTH | 0.316 INCHES MINIMUM AND 0.326 INCHES MAXIMUM |
| SECOND LEG SLOT WIDTH | 0.191 INCHES MINIMUM AND 0.201 INCHES MAXIMUM |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| SECOND LEG LENGTH | 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM |
| SECOND LEG THICKNESS | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| SECOND LEG WIDTH | 0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | TT-E-529 FED SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | ENAMEL |