| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CORNER RADIUS | 0.250 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.510 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.215 INCHES MINIMUM AND 0.225 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL |
| FIRST LEG THICKNESS | 0.038 INCHES MINIMUM AND 0.043 INCHES MAXIMUM |
| FIRST LEG WIDTH | 2.010 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.866 INCHES MINIMUM AND 0.876 INCHES MAXIMUM |
| FIRST LEG STYLE | CORNER RADIUS |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4910 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | TITANIUM ALLOY |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL |
| SECOND LEG LENGTH | 2.420 INCHES MINIMUM AND 2.425 INCHES MAXIMUM |
| SECOND LEG OFFSET ANGLE | 10.0 DEGREES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | END RADIUS |
| SECOND LEG THICKNESS | 0.038 INCHES MINIMUM AND 0.043 INCHES MAXIMUM |
| SECOND LEG END RADIUS | 0.250 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG HOLE DIAMETER | 0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM |
| SECOND LEG WIDTH | 0.500 INCHES NOMINAL |
| STYLE DESIGNATOR | OFFSET ANGLE |