|
|
|
National Stock Number:
5340-00-850-4763
Federal Supply Class:
5340
National Item Identification Number:
008504763
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| BL6124 | 08484 | BREEZE-EASTERN LLC |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 1.523 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.125 INCHES NOMINAL | | CENTER SECTION WIDTH | 0.688 INCHES NOMINAL | | FABRICATION METHOD | STAMPED | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.312 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.344 INCHES NOMINAL | | FIRST LEG ANGLE | 125.0 DEGREES NOMINAL | | FIRST LEG LENGTH | 0.812 INCHES NOMINAL | | FIRST LEG STYLE | END RADIUS | | FIRST LEG END RADIUS | 0.375 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | FIRST LEG HOLE DIAMETER | 0.199 INCHES MINIMUM AND 0.205 INCHES MAXIMUM | | FIRST LEG THICKNESS | 0.125 INCHES NOMINAL | | FIRST LEG WIDTH | 0.688 INCHES NOMINAL | | SPECIAL FEATURES | 2ND LEG,ONE CORNER CHAMFERED 0.250 IN. BY 40.0 DEG ANGLE | | SECOND LEG ANGLE | 125.0 DEGREES NOMINAL | | SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | SECOND LEG HOLE DIAMETER | 0.259 INCHES MINIMUM AND 0.265 INCHES MAXIMUM | | SECOND LEG LENGTH | 0.937 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.312 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.344 INCHES NOMINAL | | SECOND LEG THICKNESS | 0.125 INCHES NOMINAL | | SECOND LEG WIDTH | 0.688 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | SQUARE | | STYLE DESIGNATOR | DOUBLE ANGLE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-13924,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | OXIDE |
|
|