|
|
|
National Stock Number:
5340-00-856-9078
Federal Supply Class:
5340
National Item Identification Number:
008569078
Description:
BRACKET,ANGLE
Detail:
A ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
|
Manufacturer Information:
| 443843 | 11449 | TURBO POWER & MARINE SYSTEM INC SUB OF UNITED TECHNOLOGIES CORP | | 443843 | 52661 | RTX CORPORATION | | 443843 | 77445 | RTX CORPORATION | | 65-11659-97 | 82918 | THE BOEING COMPANY |
|
Techincal Specification:
| CRITICALITY CODE JUSTIFICATION | FEAT | | FIRST LEG ANGLE | 75.0 DEGREES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.312 INCHES NOMINAL | | FIRST LEG END RADIUS | 0.500 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | FIRST LEG HOLE DIAMETER | 0.344 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL | | FIRST LEG STYLE | END RADIUS | | FIRST LEG THICKNESS | 0.059 INCHES NOMINAL | | FIRST LEG WIDTH | 0.625 INCHES NOMINAL | | FIRST LEG LENGTH | 0.926 INCHES NOMINAL | | FSC APPLICATION DATA | ENGINE,ACFT,TURBO-FAN | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 410 | | SECOND LEG END RADIUS | 0.500 INCHES NOMINAL | | SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | SECOND LEG HOLE DIAMETER | 0.219 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.310 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.312 INCHES NOMINAL | | SECOND LEG THICKNESS | 0.059 INCHES NOMINAL | | SECOND LEG WIDTH | 0.625 INCHES NOMINAL | | SECOND LEG LENGTH | 1.129 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | END RADIUS | | SPECIAL FEATURES | THIS PART MEETS THE Y REQUIREMENTS DUE TO CRITICAL FEATURES, TOLERANCES, FIT RESTRICTIONS, MATERIAL PROPERTIES AND MANUFACTURING PROCESS. FAILURE COULD RESULT IN LOSS OR SUBSTANTIAL DAMAGE TO WEAPON SYSTEM, DEATH OR SERIOUS INJURY | | STYLE DESIGNATOR | ANGLE | | SURFACE TREATMENT | PASSIVATE |
|
|