| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST LEG END WIDTH | 5.580 INCHES MINIMUM AND 6.180 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE |
| FIRST LEG STYLE | CHAMFERED ENDS |
| FIRST LEG THICKNESS | 0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM |
| FIRST LEG WIDTH | 6.820 INCHES MINIMUM AND 6.940 INCHES MAXIMUM |
| FIRST LEG LENGTH | 1.960 INCHES MINIMUM AND 2.040 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-13281,CLB,GR2 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| SECOND LEG CUTOUT LENGTH | 0.560 INCHES MINIMUM AND 0.680 INCHES MAXIMUM |
| SECOND LEG CUTOUT WIDTH | 6.000 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.311 INCHES MINIMUM AND 0.317 INCHES MAXIMUM |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 7.105 INCHES MINIMUM AND 7.145 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.360 INCHES MINIMUM AND 0.400 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.440 INCHES MINIMUM AND 0.560 INCHES MAXIMUM |
| SECOND LEG THICKNESS | 0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM |
| SECOND LEG WIDTH | 8.190 INCHES MINIMUM AND 8.310 INCHES MAXIMUM |
| SECOND LEG LENGTH | 1.960 INCHES MINIMUM AND 2.040 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CUT OUT |
| SPECIAL FEATURES | WHEN VIEWING SECOND LEG,THE HOLE TO THE RIGHT SIDE IS ACTUALLY A SLOT WITCH EXTENDS TO THE LOWER EDGE OF THE BRACKET |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | TT-P-636 FED SPEC 1ST TREATMENT RESPONSE AND MIL-E-52798 MIL SPEC 2ND TREATMENT RESPONSE OR MIL-52835 MIL SPEC 2ND TREATMENT RESPONSE |
| SURFACE TREATMENT | PRIMER AND ENAMEL |