|
|
|
National Stock Number:
5340-00-864-5457
Federal Supply Class:
5340
National Item Identification Number:
008645457
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 105902 | 05257 | GENERAL DYNAMICS LAND SYSTEMS - CANADA CORPORATION |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 1.094 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.063 INCHES NOMINAL | | CENTER SECTION WIDTH | 1.062 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.156 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.219 INCHES NOMINAL | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.625 INCHES NOMINAL | | FIRST LEG STYLE | SQUARE | | FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES | | FIRST LEG HOLE DIAMETER | 0.136 INCHES NOMINAL | | FIRST LEG LENGTH | 0.438 INCHES NOMINAL | | FIRST LEG WIDTH | 1.062 INCHES NOMINAL | | HEAT TREATMENT | H-34 STRAIN HARDENED | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/8 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 5052 | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.531 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.531 INCHES NOMINAL | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG LENGTH | 1.125 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | SECOND LEG HOLE DIAMETER | 0.816 INCHES NOMINAL | | SECOND LEG STYLE | SQUARE | | SECOND LEG WIDTH | 1.062 INCHES NOMINAL | | STYLE DESIGNATOR | DOUBLE ANGLE | | SURFACE TREATMENT | CHROMATE | | SPECIAL FEATURES | TWO CORNERS ON LEG B CHAMFERED 1/4 IN. BY 45 DEG |
|
|