| CENTER SECTION HEIGHT | 1.060 INCHES NOMINAL |
| CENTER SECTION THICKNESS | 0.054 INCHES MINIMUM AND 0.066 INCHES MAXIMUM |
| CENTER SECTION WIDTH | 0.620 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.310 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.310 INCHES NOMINAL |
| FIRST LEG OFFSET ANGLE | 56.0 DEGREES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.054 INCHES MINIMUM AND 0.066 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.206 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.650 INCHES NOMINAL |
| FIRST LEG WIDTH | 0.620 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6350 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.310 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.310 INCHES NOMINAL |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG LENGTH | 0.810 INCHES NOMINAL |
| SECOND LEG OFFSET ANGLE | 56.0 DEGREES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG HOLE DIAMETER | 0.266 INCHES NOMINAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.054 INCHES MINIMUM AND 0.066 INCHES MAXIMUM |
| SECOND LEG WIDTH | 0.620 INCHES NOMINAL |
| SPECIAL FEATURES | HARDNESS ROCKWELL C26 TO ROCKWELL C32 |
| STYLE DESIGNATOR | OFFSET DOUBLE ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CADMIUM |