| CENTER SECTION HEIGHT | 0.590 INCHES NOMINAL |
| CENTER SECTION THICKNESS | 0.045 INCHES MINIMUM AND 0.050 INCHES MAXIMUM |
| CENTER SECTION WIDTH | 2.700 INCHES NOMINAL |
| FABRICATION METHOD | MACHINED |
| FIRST LEG CORNER RADIUS | 0.250 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | THREE HOLES |
| FIRST LEG HOLE DIAMETER | 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 1.100 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | 1.100 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG THICKNESS | 0.045 INCHES MINIMUM AND 0.050 INCHES MAXIMUM |
| FIRST LEG WIDTH | 2.700 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.750 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS4910 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | TITANIUM ALLOY |
| SECOND LEG HOLE ARRANGEMENT STYLE | NO HOLE |
| SECOND LEG WIDTH | 2.700 INCHES NOMINAL |
| SECOND LEG LENGTH | 1.540 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE AND TAPERED |
| SECOND LEG THICKNESS | 0.045 INCHES MINIMUM AND 0.050 INCHES MAXIMUM |
| SPECIAL FEATURES | FIRST LEG RAISED 1 DEG 21 MIN ON LEFT SIDE |
| STYLE DESIGNATOR | DOUBLE ANGLE |