| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.250 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.125 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.125 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG SLOT WIDTH | 0.116 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG HOLE ARRANGEMENT STYLE | 2 SLOTS |
| FIRST LEG LENGTH | 0.344 INCHES NOMINAL |
| FIRST LEG THICKNESS | 0.050 INCHES NOMINAL |
| FIRST LEG WIDTH | 0.500 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-636,COND 4 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| MOUNTING HOLE TYPE | THREADED |
| SPECIAL FEATURES | 4 HOLES ARE TAPPED AND HAVE 3-48 NC-2B THDS |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.281 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.250 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| SECOND LEG HOLE DIAMETER | 0.082 INCHES NOMINAL |
| SECOND LEG LENGTH | 0.656 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.156 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.125 INCHES NOMINAL |
| SECOND LEG WIDTH | 0.500 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.050 INCHES NOMINAL |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CADMIUM |