| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.984 INCHES MINIMUM AND 2.016 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.500 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM |
| FIRST LEG LENGTH | 1.734 INCHES MINIMUM AND 1.766 INCHES MAXIMUM |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.562 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| FIRST LEG HOLE DIAMETER | 0.281 INCHES NOMINAL |
| FIRST LEG THICKNESS | 0.125 INCHES NOMINAL |
| FIRST LEG WIDTH | 3.125 INCHES NOMINAL |
| MATERIAL | STEEL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.984 INCHES MINIMUM AND 2.016 INCHES MAXIMUM |
| SECOND LEG END WIDTH | 2.250 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.266 INCHES NOMINAL |
| SECOND LEG LENGTH | 0.188 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.500 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.562 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.125 INCHES NOMINAL |
| SECOND LEG WIDTH | 3.125 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE AND TAPERED |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | TT-E-529 FED SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | ENAMEL |