| CENTER SECTION HEIGHT | 4.340 INCHES MINIMUM AND 4.420 INCHES MAXIMUM |
| CENTER SECTION THICKNESS | 0.190 INCHES NOMINAL |
| CENTER SECTION WIDTH | 1.470 INCHES MINIMUM AND 1.530 INCHES MAXIMUM |
| FABRICATION METHOD | FORMED |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.750 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.720 INCHES MINIMUM AND 0.740 INCHES MAXIMUM |
| FIRST LEG SLOT WIDTH | 0.416 INCHES MINIMUM AND 0.431 INCHES MAXIMUM |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.190 INCHES NOMINAL |
| FIRST LEG WIDTH | 1.470 INCHES MINIMUM AND 1.530 INCHES MAXIMUM |
| FIRST LEG LENGTH | 1.670 INCHES MINIMUM AND 1.710 INCHES MAXIMUM |
| FIRST LEG SLOT LENGTH | 0.540 INCHES MINIMUM AND 0.560 INCHES MAXIMUM |
| MATERIAL | ALUMINUM ALLOY |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.830 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.750 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.190 INCHES NOMINAL |
| SECOND LEG WIDTH | 1.470 INCHES MINIMUM AND 1.530 INCHES MAXIMUM |
| SECOND LEG LENGTH | 13.940 INCHES MINIMUM AND 14.000 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG SLOT LENGTH | 1.100 INCHES MINIMUM AND 1.140 INCHES MAXIMUM |
| SECOND LEG SLOT WIDTH | 0.416 INCHES MINIMUM AND 0.431 INCHES MAXIMUM |
| SECOND LEG STYLE | SQUARE |
| STYLE DESIGNATOR | DOUBLE ANGLE |
| SURFACE TREATMENT | ANODIZE |