| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 0.344 INCHES NOMINAL |
| FIRST LEG END RADIUS | 0.188 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | THREE HOLES |
| FIRST LEG HOLE DIAMETER | 0.097 INCHES MINIMUM AND 0.102 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | 0.344 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.156 INCHES NOMINAL |
| FIRST LEG STYLE | END RADIUS |
| FIRST LEG THICKNESS | 0.040 INCHES NOMINAL |
| FIRST LEG WIDTH | 1.000 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.625 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/4,TEMPER O FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 2024 |
| MOUNTING HOLE TYPE | COUNTERSUNK |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.625 INCHES NOMINAL |
| SECOND LEG END RADIUS | 0.500 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.127 INCHES MINIMUM AND 0.133 INCHES MAXIMUM |
| SECOND LEG LENGTH | 0.688 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.188 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.187 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.040 INCHES NOMINAL |
| SECOND LEG WIDTH | 1.000 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | END RADIUS |
| SPECIAL FEATURES | COUNTERSUNK HOLE FIRST LEG 0.170 IN. DIA |
| SPECIFICATION/STANDARD DATA | 26512-GB11D9-1 MANUFACTURERS SPECIFICATION |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT | ANODIZE AND PRIMER |