| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.190 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.190 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.094 INCHES NOMINAL |
| FIRST LEG WIDTH | 1.060 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.750 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/6,H323 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-250/7,H32 FED SPEC 2ND MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 5083 OR ALUMINUM ALLOY 5086 |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.500 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.530 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.094 INCHES NOMINAL |
| SECOND LEG WIDTH | 1.060 INCHES NOMINAL |
| SECOND LEG LENGTH | 1.380 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG SLOT LENGTH | 0.567 INCHES MINIMUM AND 0.582 INCHES MAXIMUM |
| SECOND LEG SLOT WIDTH | 0.535 INCHES MINIMUM AND 0.550 INCHES MAXIMUM |
| SECOND LEG STYLE | SQUARE AND TAPERED |
| STYLE DESIGNATOR | ANGLE |