| CENTER SECTION HEIGHT | 0.205 INCHES NOMINAL |
| CENTER SECTION THICKNESS | 0.015 INCHES NOMINAL |
| CENTER SECTION WIDTH | 0.360 INCHES MINIMUM AND 0.400 INCHES MAXIMUM |
| FIRST LEG ANGLE | 120.0 DEGREES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.186 INCHES MINIMUM AND 0.196 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.187 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.187 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.015 INCHES NOMINAL |
| FIRST LEG WIDTH | 0.360 INCHES MINIMUM AND 0.400 INCHES MAXIMUM |
| FIRST LEG LENGTH | 0.750 INCHES NOMINAL |
| MATERIAL | STEEL COMP 1095 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG ANGLE | 120.0 DEGREES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.344 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.123 INCHES MINIMUM AND 0.133 INCHES MAXIMUM |
| SECOND LEG LENGTH | 0.750 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.187 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.187 INCHES NOMINAL |
| SECOND LEG WIDTH | 0.360 INCHES MINIMUM AND 0.400 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.015 INCHES NOMINAL |
| STYLE DESIGNATOR | DOUBLE ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 1 FED SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CADMIUM AND CHROMATE |