|
|
|
National Stock Number:
5340-01-078-5887
Federal Supply Class:
5340
National Item Identification Number:
010785887
Description:
BRACKET,ANGLE
Detail:
A ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
|
Manufacturer Information:
| 12268806-1 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE | | FIRST LEG THICKNESS | 0.125 INCHES NOMINAL | | FIRST LEG WIDTH | 3.500 INCHES NOMINAL | | FIRST LEG LENGTH | 1.250 INCHES NOMINAL | | FIRST LEG STYLE | SQUARE | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/6 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 5083 | | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 8.000 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.438 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.000 INCHES NOMINAL | | SECOND LEG LENGTH | 2.000 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | SQUARE | | SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES | | SECOND LEG HOLE DIAMETER | 0.406 INCHES MINIMUM AND 0.460 INCHES MAXIMUM | | SECOND LEG THICKNESS | 0.125 INCHES NOMINAL | | SECOND LEG WIDTH | 9.500 INCHES NOMINAL | | STYLE DESIGNATOR | ANGLE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | TT-P-1757 FED SPEC 1ST TREATMENT RESPONSE AND MIL-E-52798 MIL SPEC 2ND TREATMENT RESPONSE | | SURFACE TREATMENT | PRIMER AND ENAMEL |
|
|