|
|
|
National Stock Number:
5340-01-080-8910
Federal Supply Class:
5340
National Item Identification Number:
010808910
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 12001514 | 19200 | US ARMY ARDEC RDECOM |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 11.320 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.375 INCHES NOMINAL | | CENTER SECTION WIDTH | 4.260 INCHES NOMINAL | | FABRICATION METHOD | WELDED | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.500 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES | | FIRST LEG HOLE DIAMETER | 0.560 INCHES NOMINAL | | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 3.250 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.500 INCHES NOMINAL | | FIRST LEG THICKNESS | 0.375 INCHES NOMINAL | | FIRST LEG WIDTH | 4.260 INCHES NOMINAL | | FIRST LEG LENGTH | 2.495 INCHES NOMINAL | | FIRST LEG STYLE | SQUARE | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11,TEMPER 0 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/8,TEMPER 0 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 5052 | | MOUNTING HOLE TYPE | PLAIN | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.820 INCHES NOMINAL | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG LENGTH | 6.025 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | END RADIUS | | SECOND LEG END RADIUS | 0.820 INCHES NOMINAL | | SECOND LEG HOLE DIAMETER | 0.680 INCHES NOMINAL | | SECOND LEG THICKNESS | 0.375 INCHES NOMINAL | | SECOND LEG WIDTH | 1.640 INCHES NOMINAL | | STYLE DESIGNATOR | DOUBLE ANGLE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541,CLASS 1A MIL SPEC 1ST TREATMENT RESPONSE AND TT-E-485 FED SPEC 2ND TREATMENT RESPONSE | | SURFACE TREATMENT | CHROMATE AND ENAMEL |
|
|