| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 2.734 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.520 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.353 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 1.980 INCHES NOMINAL |
| FIRST LEG SLOT LENGTH | 0.650 INCHES MINIMUM AND 0.660 INCHES MAXIMUM |
| FIRST LEG SLOT WIDTH | 0.190 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG HOLE ARRANGEMENT STYLE | 2 SLOTS |
| FIRST LEG THICKNESS | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| FIRST LEG WIDTH | 3.087 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5599 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5666 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL CORROSION RESISTING |
| MOUNTING HOLE TYPE | COUNTERBORED AND THREADED |
| SECOND LEG END WIDTH | 0.600 INCHES MINIMUM AND 0.640 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | THREE HOLES |
| SECOND LEG HOLE DIAMETER | 0.270 INCHES MINIMUM AND 0.284 INCHES MAXIMUM |
| SECOND LEG LENGTH | 0.900 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.570 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| SECOND LEG THICKNESS | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| SECOND LEG WIDTH | 3.420 INCHES MINIMUM AND 3.460 INCHES MAXIMUM |
| SECOND LEG OFFSET ANGLE | 15.0 DEGREES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | ANGLE |
| SPECIAL FEATURES | HOLE ON FIRST LEG 0.050 TO 0.060 IN. THRU AND ONE SMALL HOLE 0.190 IN. DIA TO 0.210 IN. DIA,COUNTERSINK 80 DEGREES TO 120 DEGREES,THREADED 190-32 UNF 3B; SECOND LEG FOURTH HOLE 0.270 IN. DIA TO 0.284 IN. DIA |
| STYLE DESIGNATOR | OFFSET ANGLE |