| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 3.000 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.000 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.875 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CHAMFER ANGLE | 50.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 4.000 INCHES NOMINAL |
| FIRST LEG SLOT LENGTH | 0.875 INCHES MINIMUM AND 0.938 INCHES MAXIMUM |
| FIRST LEG SLOT WIDTH | 0.656 INCHES MINIMUM AND 0.687 INCHES MAXIMUM |
| FIRST LEG STYLE | CHAMFERED ENDS |
| FIRST LEG END WIDTH | 3.750 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | 2 SLOTS |
| FIRST LEG THICKNESS | 0.620 INCHES NOMINAL |
| FIRST LEG WIDTH | 4.750 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-741 FED SPEC 1ST MATERIAL RESPONSE AND MIL-S-22141 MIL SPEC 2ND MATERIAL RESPONSE AND MIL-S-22141 MIL SPEC 3RD MATERIAL RESPONSE |
| MATERIAL | STEEL OR STEEL COMP 1020 OR STEEL COMP 1030 |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 2.590 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.175 INCHES NOMINAL |
| SECOND LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 2.590 INCHES NOMINAL |
| SECOND LEG LENGTH | 5.620 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.080 INCHES NOMINAL |
| SECOND LEG END WIDTH | 2.000 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| SECOND LEG HOLE DIAMETER | 0.375 INCHES NOMINAL |
| SECOND LEG STYLE | CHAMFERED ENDS |
| SECOND LEG THICKNESS | 0.750 INCHES NOMINAL |
| SECOND LEG WIDTH | 4.000 INCHES NOMINAL |
| SPECIAL FEATURES | FIFTH HOLE IN SECOND LEG 2.585 IN. MIN 2.595 IN. MAX DIA. 4 HOLES ON SECOND LEG ARE THREADED 0.376-16 UNC-2B;FIRST LEG IS MACHINED ALONG LENGTH PERDRAWING |
| STYLE DESIGNATOR | ANGLE |