| CENTER SECTION HEIGHT | 1.190 INCHES NOMINAL |
| CENTER SECTION THICKNESS | 0.062 INCHES NOMINAL |
| CENTER SECTION WIDTH | 0.940 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG SLOT LENGTH | 0.300 INCHES NOMINAL |
| FIRST LEG SLOT WIDTH | 0.250 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.062 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| FIRST LEG LENGTH | 0.660 INCHES NOMINAL |
| FIRST LEG WIDTH | 0.940 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766,1/4 HARD FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 302 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.406 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.125 INCHES NOMINAL |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.875 INCHES NOMINAL |
| SECOND LEG LENGTH | 1.400 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.128 INCHES MINIMUM AND 0.134 INCHES MAXIMUM |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.062 INCHES NOMINAL |
| SECOND LEG WIDTH | 0.940 INCHES NOMINAL |
| SPECIAL FEATURES | ONE ADDITIONAL SLOT IN FIRST LEG,0.300 IN. LG,0.156 IN. W |
| STYLE DESIGNATOR | DOUBLE ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-14072 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | PASSIVATE |