| LENGTH | 7.625 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/4 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 2024 |
| MOUNTING HOLE DIAMETER | 0.281 INCHES NOMINAL ALL HOLES |
| MOUNTING HOLE DIAMETER | 0.406 INCHES NOMINAL FIRST HOLE |
| MOUNTING HOLE TYPE | UNTHREADED |
| MOUNTING HOLE QUANTITY | 8 |
| SHAPE | RECTANGULAR |
| SPECIAL FEATURES | MOUNTING CONFIGURATION: THERE ARE FOUR HOLES,ONE LOCATED IN EACH CORNER;THEY ARE LOCATED 0.312 FROM BOTH THE WIDTH AND LENGTH; THE DISTANCE BETWEEN THE HOLES ALONG THE WIDTH IS 4.000 INCHES AND 7.000 INCHES BETWEEN HOLES ALONGTHE LENGTH; THERE ARE TWO HOLES LOCATED 1.938 FROM LEFT SIDES HOLE TO CENTER OF TWO HOLES ALONG THE LENGTH AND THE SECOND SET OF TWO ARE LOCATED 3.125 INCHES ALONG THE LENGTH FROM FIRST SET OF TWO HOLES CENTER; THE FIRST TWO HOLES ALONG THE WIDTH ARE LOCATED 1.312 INCHES FROM UPPER LEFT HAND CORNER HOLE CENTER TO CENTER OF HOLES ALONG THE WIDTH AND THE SECOND SET OF TWO HOLES ARE LOCATED 1.625 INCHES FROM CENTER OF FIRST OF TWO HOLES TO CENTER OF HOLE OF SECOND SET ALONG THE WIDTH |
| WIDTH | 4.625 INCHES NOMINAL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CHROMATE |
| THICKNESS | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |