| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.171 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.000 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.220 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.190 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.059 INCHES MINIMUM AND 0.067 INCHES MAXIMUM |
| FIRST LEG WIDTH | 1.380 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/8,TH32 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 5052 |
| SECOND LEG CORNER RADIUS | 0.120 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.984 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.125 INCHES NOMINAL |
| SECOND LEG LENGTH | 0.880 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.380 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.220 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.059 INCHES MINIMUM AND 0.067 INCHES MAXIMUM |
| SECOND LEG WIDTH | 1.380 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CORNER RADIUS |
| STYLE DESIGNATOR | ANGLE |
| SPECIAL FEATURES | SLOT IN SECOND LEG 0.786 IN. LONG,0.458 IN. WIDE |