|
|
|
National Stock Number:
5340-01-133-5308
Federal Supply Class:
5340
National Item Identification Number:
011335308
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 10393105 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 12299627 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 12299627-15 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 1.620 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.125 INCHES NOMINAL | | CENTER SECTION WIDTH | 10.130 INCHES NOMINAL | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG CUTOUT LENGTH | 0.750 INCHES NOMINAL | | FIRST LEG CUTOUT WIDTH | 1.380 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE | | FIRST LEG STYLE | CUT OUT | | FIRST LEG THICKNESS | 0.125 INCHES NOMINAL | | FIRST LEG WIDTH | 10.130 INCHES NOMINAL | | FIRST LEG LENGTH | 4.560 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/7 FED SPEC SINGLE MATERIAL RESPONSE AND QQ-A-250/6 FED SPEC 2ND MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 5086 | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG CHAMFER ANGLE | 45.0 DEGREES MINIMUM AND 90.0 DEGREES MAXIMUM | | SECOND LEG END WIDTH | 9.750 INCHES NOMINAL | | SECOND LEG HOLE ARRANGEMENT STYLE | 2 SLOTS | | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 8.620 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.500 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.750 INCHES NOMINAL | | SECOND LEG THICKNESS | 0.125 INCHES NOMINAL | | SECOND LEG WIDTH | 10.130 INCHES NOMINAL | | SECOND LEG LENGTH | 1.310 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG SLOT LENGTH | 0.750 INCHES NOMINAL | | SECOND LEG SLOT WIDTH | 0.438 INCHES NOMINAL | | SECOND LEG STYLE | CHAMFERED ENDS | | SPECIAL FEATURES | BOTH BOTTOM CORNERS ARE CUT AT 45 DEGREE TO 0.380 IN. | | STYLE DESIGNATOR | DOUBLE ANGLE |
|
|