|
|
|
National Stock Number:
5340-01-134-5968
Federal Supply Class:
5340
National Item Identification Number:
011345968
Description:
HINGE,BUTT
Detail:
A hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
|
Manufacturer Information:
| SM-D-414800 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR |
|
Techincal Specification:
| PIN REMOVABILITY | NONREMOVABLE | | REVERSIBLE FEATURE | NOT INCLUDED | | KNUCKLE QUANTITY | 9 | | PERFORMANCE TYPE | NOT RATED | | MATERIAL AND LOCATION | ALUMINUM ALLOY, QQ-A-250/8, ALLOY 5052, H34 BODY | | CRES,ASTM A582,TYPE 303,PIN | | STYLE DESIGNATOR | BUTT W/JAMB LEAF OFFSET | | SURFACE TREATMENT AND LOCATION | PASSIVATED,QQ-P-35,PIN | | MATERIAL THICKNESS | 0.051 INCHES NOMINAL | | MOUNTING HOLE DIAMETER | 0.138 INCHES MINIMUM AND | | 0.143 INCHES MAXIMUM | | BODY WIDTH | 6.218 INCHES NOMINAL | | JAMB LEAF OFFSET DISTANCE | 0.187 INCHES NOMINAL | | DEVELOPED DISTANCE FROM PIN CENTER TO OFFSET JAMB LEAF EDGE | 0.396 INCHES MINIMUM AND | | 0.406 INCHES MAXIMUM | | KNUCKLE TYPE | FRICTION | | MOUNTING HOLE QUANTITY | 5 | | SPECIAL FEATURES | HING MUST FOLD BACK ON SELF; TWO HOLES 0.275 IN. MIN |
|
|