|
|
|
National Stock Number:
5340-01-134-5995
Federal Supply Class:
5340
National Item Identification Number:
011345995
Description:
CLIP,SPRING TENSION
Detail:
A preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
|
Manufacturer Information:
| 1018990-003 | 05037 | ANACOMP, INC. | | 1018990-003 | 0HBH2 | LEXEL IMAGING SYSTEMS INC | | M24066/2-303 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | M24066/2-303 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | M24066/2-103 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | 713364 | 82199 | ROHDE & SCHWARZ USA, INC. | | NASM24066/2 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MIL-C-24066/2 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| DISTANCE FROM LOOP CENTER TO END | 0.138 INCHES MINIMUM | | LENGTH | 0.200 INCHES MINIMUM AND 0.240 INCHES MAXIMUM | | LOOP/HOLDING DIMENSION | 0.185 INCHES MINIMUM AND 0.205 INCHES MAXIMUM | | OVERALL HEIGHT | 0.250 INCHES MINIMUM AND 0.290 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.009 INCHES MINIMUM AND 0.015 INCHES MAXIMUM | | MOUNTING METHOD | UNTHREADED HOLE | | WIDTH | 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL |
|
|