| FEATURES PROVIDED | NUT |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| FIRST LEG LENGTH | 0.470 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.150 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.157 INCHES NOMINAL |
| FIRST LEG WIDTH | 0.275 INCHES NOMINAL |
| FIRST LEG SLOT LENGTH | 0.160 INCHES MINIMUM AND 0.170 INCHES MAXIMUM |
| FIRST LEG SLOT WIDTH | 0.137 INCHES MINIMUM AND 0.143 INCHES MAXIMUM |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.050 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/8,TEMPER T4 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-250/11,TEMPER T4 FED SPEC 2ND MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 5052 OR ALUMINUM ALLOY 6061 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.280 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.157 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 1.100 INCHES NOMINAL |
| SECOND LEG LENGTH | 1.820 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.155 INCHES MINIMUM AND 0.160 INCHES MAXIMUM |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.050 INCHES NOMINAL |
| SECOND LEG WIDTH | 0.315 INCHES NOMINAL |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541,CLASS 1A MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CHROMATE |