| CENTER SECTION HEIGHT | 0.132 INCHES NOMINAL |
| CENTER SECTION THICKNESS | 0.009 INCHES MINIMUM AND 0.011 INCHES MAXIMUM |
| CENTER SECTION WIDTH | 0.188 INCHES NOMINAL |
| FIRST LEG ANGLE | 60.0 DEGREES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE |
| FIRST LEG LENGTH | 0.094 INCHES NOMINAL |
| FIRST LEG WIDTH | 0.188 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.009 INCHES MINIMUM AND 0.011 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-533 COND 1/2H FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | COPPER ALLOY 170 OR COPPER ALLOY 172 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.095 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.094 INCHES NOMINAL |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG END RADIUS | 0.125 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG HOLE DIAMETER | 0.091 INCHES MINIMUM AND 0.098 INCHES MAXIMUM |
| SECOND LEG LENGTH | 0.188 INCHES NOMINAL |
| SECOND LEG STYLE | END RADIUS |
| SECOND LEG THICKNESS | 0.009 INCHES MINIMUM AND 0.011 INCHES MAXIMUM |
| SECOND LEG WIDTH | 0.188 INCHES NOMINAL |
| STYLE DESIGNATOR | DOUBLE ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-495 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | OXIDE |