| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.140 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.460 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.420 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.200 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.210 INCHES NOMINAL |
| FIRST LEG WIDTH | 0.840 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.053 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11 TEMP T4 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY |
| SPECIAL FEATURES | 2ND LEG HAS CUT-OUT 0.440 IN. LG BY 0.385 IN. DP; BRACKET,BEARING |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.640 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.150 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.100 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.096 INCHES NOMINAL |
| SECOND LEG LENGTH | 0.570 INCHES NOMINAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.053 INCHES NOMINAL |
| SECOND LEG WIDTH | 0.840 INCHES NOMINAL |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-14072,E12 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-P-23377 MIL SPEC 2ND TREATMENT RESPONSE AND MIL-P-22808 MED GRAY MIL SPEC 3RD TREATMENT RESPONSE |
| SURFACE TREATMENT | PASSIVATE AND PRIMER AND ENAMEL |