| CRITICALITY CODE JUSTIFICATION | FEAT |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG END WIDTH | 0.200 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.171 INCHES MINIMUM AND 0.176 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.400 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.205 INCHES NOMINAL |
| FIRST LEG WIDTH | 0.320 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.600 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE AND TAPERED |
| FIRST LEG THICKNESS | 0.063 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 302 |
| SPECIAL FEATURES | 2ND LEG HAS CUT-OUT ALONG 90 DEG ANGLE CREATING 2 SMALL LEGS OPPOSITE SIDE OF ANGLE,CUT-OUT 0.25 IN. DP BY 2.52 IN. LG; BOTH LEGS IDENTICAL AS IND1CATED BY 1ST LEG; TOLERANCES ON DIMENSIONS OF POM.02IN/POM .005IN.ARE CRITICAL TO FORM, FIT, FUNCTION AND APPLICATION TO THE ALQ131 SYSTEM |
| SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | 1.250 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.330 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 1.250 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG END WIDTH | 2.760 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | THREE HOLES |
| SECOND LEG HOLE DIAMETER | 0.134 INCHES MINIMUM AND 0.139 INCHES MAXIMUM |
| SECOND LEG LENGTH | 0.750 INCHES NOMINAL |
| SECOND LEG STYLE | SQUARE AND TAPERED |
| SECOND LEG THICKNESS | 0.063 INCHES NOMINAL |
| SECOND LEG WIDTH | 3.160 INCHES NOMINAL |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 TYPE 2 FED SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | PASSIVATE |