|
|
|
National Stock Number:
5340-01-147-0026
Federal Supply Class:
5340
National Item Identification Number:
011470026
Description:
HINGE,BUTT
Detail:
A hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
|
Manufacturer Information:
| 1652139 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | 1652139-1 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| PIN REMOVABILITY | NONREMOVABLE | | REVERSIBLE FEATURE | NOT INCLUDED | | KNUCKLE QUANTITY | 9 | | PERFORMANCE TYPE | NOT RATED | | MATERIAL AND LOCATION | ALUMINUM ALLOY, QQ-A-250/8, ALLOY 5052, H24 BODY OR | | ALUMINUM ALLOY, QQ-A-250/8, ALLOY 5052, H34 BODY AND | | ALUMINUM ALLOY, QQ-A-225/7 PIN | | STYLE DESIGNATOR | BUTT | | SURFACE TREATMENT AND LOCATION | ENAMEL, MIL-E-15090, TYPE 3, CLASS 2 OVERALL | | OVERALL LENGTH | 7.880 INCHES NOMINAL | | MATERIAL THICKNESS | 0.070 INCHES MINIMUM AND | | 0.080 INCHES MAXIMUM | | MOUNTING HOLE DIAMETER | 0.231 INCHES MINIMUM AND | | 0.237 INCHES MAXIMUM | | PIN DIAMETER | 0.187 INCHES NOMINAL | | PIN CENTER TO BODY EDGE DISTANCE | 1.000 INCHES NOMINAL | | HINGE MOUNTING TYPE | FULL SURFACE | | KNUCKLE TYPE | FRICTION | | MOUNTING HOLE QUANTITY | 10 | | SPECIAL FEATURES | HINGE PIN SHALL BE 0.250 IN. SHORTER THAN HINGE; PIN C TO BODY EDGE OF ONE LEAF 1.157 IN. AND 0.907 IN. OTHER LEAF | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 10001 | | DESIGN CONTROL REFERENCE | 1652139-1 |
|
|