| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.188 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.188 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.312 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.500 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.154 INCHES MINIMUM AND 0.161 INCHES MAXIMUM |
| FIRST LEG THICKNESS | 0.678 INCHES MINIMUM AND 0.718 INCHES MAXIMUM |
| FIRST LEG WIDTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-81591 COMP IC-316 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL CORROSION RESISTING |
| MOUNTING HOLE TYPE | COUNTERBORED |
| SECOND LEG HOLE ARRANGEMENT STYLE | NO HOLE |
| SECOND LEG WIDTH | 0.814 INCHES MINIMUM AND 0.844 INCHES MAXIMUM |
| SECOND LEG LENGTH | 1.595 INCHES MINIMUM AND 1.625 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG SIDE RADIUS | 0.344 INCHES NOMINAL |
| SECOND LEG STYLE | SIDE RADIUS |
| SECOND LEG THICKNESS | 0.062 INCHES MINIMUM AND 0.077 INCHES MAXIMUM |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | PASSIVATE |