|
|
|
National Stock Number:
5340-01-153-1283
Federal Supply Class:
5340
National Item Identification Number:
011531283
Description:
MOUNT,RESILIENT,UTILITY
Detail:
An item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
|
Manufacturer Information:
| 12410369-1 | F6151 | SAFRAN | | 12410369-1 | FAQ15 | SAFRAN ELECTRONICS & DEFENSE | | 93015-2 | 13636 | HUTCHINSON AEROSPACE & INDUSTRY, INC. | | J-15461-2 | 76005 | LORD CORPORATION | | 93015-2 | 81860 | HUTCHINSON AEROSPACE & INDUSTRY, INC. | | A410A011-105 | 88818 | KEARFOTT CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL CORROSION RESISTING OR | | ALUMINUM ALLOY BOLT | | ALUMINUM ALLOY MOUNTING FLANGE PLATE | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6, ALLOY 2024 FED SPEC SINGLE MATERIAL RESPONSE BOLT | | QQ-A-250/4, ALLOY 2024 FED SPEC SINGLE MATERIAL RESPONSE MOUNTING FLANGE PLATE | | SURFACE TREATMENT | CHROMATE MOUNTING FLANGE PLATE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE MOUNTING FLANGE PLATE | | STYLE DESIGNATOR | ROUND W/BUSHING TWO-HOLE FLANGE | | INSIDE DIAMETER | 0.165 INCHES MINIMUM AND | | 0.168 INCHES MAXIMUM | | FLANGE THICKNESS | 0.145 INCHES MINIMUM AND | | 0.175 INCHES MAXIMUM | | DISTANCE BETWEEN MOUNTING HOLE CENTERS | 1.464 INCHES MINIMUM AND | | 1.474 INCHES MAXIMUM | | FLANGE LENGTH | 1.875 INCHES NOMINAL | | FLANGE WIDTH | 1.250 INCHES NOMINAL | | DISTANCE FROM FLANGE TO END | 0.450 INCHES NOMINAL | | HEIGHT | 1.030 INCHES NOMINAL | | MAXIMUM LOAD RATING | 9.0 POUNDS | | SPECIAL FEATURES | HOLES SLOTTED 0.118-0.123 IN. BY 0.215 IN.; MATCHED SET,4 ISOLATORS,SET SHALL BE FABRICATED USING SAME ELASTOMER LOT; INERTIAL PLATFORM ASSEMBLY,MX-9923/A |
|
|