|
|
|
National Stock Number:
5340-01-154-2621
Federal Supply Class:
5340
National Item Identification Number:
011542621
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 10112788 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 4062T16G02 | 99207 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 0.565 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.070 INCHES NOMINAL | | CENTER SECTION WIDTH | 0.500 INCHES NOMINAL | | FEATURES PROVIDED | NUT | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG LENGTH | 0.690 INCHES NOMINAL | | FIRST LEG STYLE | END RADIUS | | FIRST LEG END RADIUS | 0.250 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | FIRST LEG HOLE DIAMETER | 0.280 INCHES MINIMUM AND 0.285 INCHES MAXIMUM | | FIRST LEG THICKNESS | 0.070 INCHES NOMINAL | | FIRST LEG WIDTH | 0.500 INCHES NOMINAL | | FSC APPLICATION DATA | JET ENGINE,AIRCRAFT | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS4901 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | TITANIUM ALLOY | | MOUNTING HOLE TYPE | COUNTERBORED | | SPECIAL FEATURES | 1ST LEG HOLE COUNTERBORED 0.375 IN. MIN AND 0.395 IN. MAX DIA,0.025 IN. MIN AND 0.030 IN. MAX DP; NUT ATTACHED TO 1ST LEG HOLE; 2ND LEG END SLOT,0.170 IN. W,0.300 IN. LG | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | SECOND LEG HOLE DIAMETER | 0.205 INCHES NOMINAL | | SECOND LEG LENGTH | 1.010 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.570 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL | | SECOND LEG WIDTH | 0.500 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | SQUARE | | SECOND LEG THICKNESS | 0.070 INCHES NOMINAL | | STYLE DESIGNATOR | DOUBLE ANGLE |
|
|