| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.125 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.125 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.188 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 0.375 INCHES NOMINAL |
| FIRST LEG SLOT LENGTH | 0.250 INCHES NOMINAL |
| FIRST LEG SLOT WIDTH | 0.125 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG HOLE ARRANGEMENT STYLE | 2 SLOTS |
| FIRST LEG THICKNESS | 0.063 INCHES NOMINAL |
| FIRST LEG WIDTH | 1.250 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 5052 |
| MOUNTING HOLE TYPE | PLAIN |
| SPECIAL FEATURES | 2ND LEG HAS CUT OUT 0.750 IN. L,0.094 IN. DEEP APPROXIMATELY 0.375 IN. FROM END ALONG LEG LGTH 2 PLACES AND 1ST LEG IS CHAMFERED 0.062 IN. BY 45 DEG. 2 PLACES; SURFACE TREATMENT: ALODINE |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.125 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | 2 SLOTS |
| SECOND LEG LENGTH | 0.422 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.188 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.188 INCHES NOMINAL |
| SECOND LEG WIDTH | 1.250 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG SLOT LENGTH | 0.250 INCHES NOMINAL |
| SECOND LEG SLOT WIDTH | 0.125 INCHES NOMINAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.063 INCHES NOMINAL |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | CAD-127 MFR REF SINGLE TREATMENT RESPONSE |