|
|
|
National Stock Number:
5340-01-162-9781
Federal Supply Class:
5340
National Item Identification Number:
011629781
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 344714 | 11862 | GENERAL MOTORS CORP CHEVROLET MOTOR DIV SPECIAL PRODUCTS DEPT | | 344714 | 7X677 | GENERAL MOTORS LLC |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 4.100 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.088 INCHES MINIMUM AND 0.102 INCHES MAXIMUM | | CENTER SECTION WIDTH | 1.250 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.820 INCHES NOMINAL | | FIRST LEG LENGTH | 1.980 INCHES NOMINAL | | FIRST LEG OFFSET ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG STYLE | SQUARE | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.620 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | FIRST LEG HOLE DIAMETER | 0.343 INCHES MINIMUM AND 0.359 INCHES MAXIMUM | | FIRST LEG THICKNESS | 0.088 INCHES MINIMUM AND 0.102 INCHES MAXIMUM | | FIRST LEG WIDTH | 1.250 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD ALL MATERIAL RESPONSES | | MATERIAL | STEEL COMP 1008 OR STEEL COMP 1010 | | MOUNTING HOLE TYPE | PLAIN | | SECOND LEG THICKNESS | 0.088 INCHES MINIMUM AND 0.102 INCHES MAXIMUM | | SECOND LEG LENGTH | 2.160 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL | | STYLE DESIGNATOR | OFFSET DOUBLE ANGLE |
|
|