| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.160 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CORNER RADIUS | 0.060 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.410 INCHES MINIMUM AND 0.430 INCHES MAXIMUM |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 2.460 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.138 INCHES NOMINAL |
| FIRST LEG THICKNESS | 0.050 INCHES NOMINAL |
| FIRST LEG WIDTH | 2.580 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-533,1/4 HARD FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | COPPER ALLOY 170 OR COPPER ALLOY 172 |
| MOUNTING HOLE TYPE | PLAIN AND THREADED |
| SECOND LEG END WIDTH | 0.400 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG HOLE DIAMETER | 0.128 INCHES NOMINAL |
| SECOND LEG LENGTH | 0.900 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.225 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.200 INCHES NOMINAL |
| SECOND LEG WIDTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | ANGLE |
| SECOND LEG THICKNESS | 0.050 INCHES NOMINAL |
| SPECIAL FEATURES | ONE 0.128 IN. WIDE BY 0.160 IN LONG SLOT LOCATED ON SECOND LEG |
| STYLE DESIGNATOR | ANGLE |