|
|
|
National Stock Number:
5340-01-173-3319
Federal Supply Class:
5340
National Item Identification Number:
011733319
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
|
Techincal Specification:
| CENTER SECTION HEIGHT | 7.531 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.062 INCHES NOMINAL | | CENTER SECTION WIDTH | 1.000 INCHES NOMINAL | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES | | FIRST LEG HOLE DIAMETER | 0.171 INCHES NOMINAL | | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.500 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL | | FIRST LEG STYLE | SQUARE | | FIRST LEG THICKNESS | 0.062 INCHES NOMINAL | | FIRST LEG WIDTH | 1.000 INCHES NOMINAL | | FIRST LEG LENGTH | 0.500 INCHES NOMINAL | | MATERIAL | ALUMINUM ALLOY 5052 | | MOUNTING HOLE TYPE | PLAIN | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG LENGTH | 0.500 INCHES NOMINAL | | SECOND LEG THICKNESS | 0.062 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL | | SPECIAL FEATURES | 0.500 IN. HOLE DIA TWO PLACES,ONE HOLE HAS TWO FLATS 180.0 DEG APART CENTER SECTION; 2.281 IN. DISTANCE FROM EDGE TO FIRST HOLE CENTER ALONG CENTER SECTION; 3.000 IN. DISTANCE BETWEEN HOLE CENTERS ALONG CENTER SECTION; H32 HARDNESS | | STYLE DESIGNATOR | ADJACENT ANGLES | | SURFACE TREATMENT | ANODIZE |
|
|