|
|
|
National Stock Number:
5340-01-176-4031
Federal Supply Class:
5340
National Item Identification Number:
011764031
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 3141300-01-3 | 99696 | LOCKHEED MARTIN CORPORATION DIV LOCKHEED MARTIN SYSTEMS & GLOBAL SOLUTIONS | | 3141300-101-3 | 04DG4 | GENERAL DYNAMICS MISSION SYSTEMS, INC. | | 3141300-101-3 | 05699 | BRUNSWICK CORP DEFENSE DIV | | 3141300-101-3 | 17996 | GENERAL DYNAMICS-OTS, INC. |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 0.275 INCHES MINIMUM AND 0.279 INCHES MAXIMUM | | CENTER SECTION THICKNESS | 0.125 INCHES NOMINAL | | CENTER SECTION WIDTH | 0.750 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE | | FIRST LEG STYLE | SQUARE | | FIRST LEG THICKNESS | 0.125 INCHES NOMINAL | | FIRST LEG WIDTH | 0.750 INCHES NOMINAL | | FIRST LEG LENGTH | 0.380 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11,T4 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 6061 | | MOUNTING HOLE TYPE | PLAIN | | SECOND LEG END WIDTH | 0.250 INCHES NOMINAL | | SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | SECOND LEG HOLE DIAMETER | 0.219 INCHES NOMINAL | | SECOND LEG LENGTH | 1.000 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.380 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.380 INCHES NOMINAL | | SECOND LEG THICKNESS | 0.125 INCHES NOMINAL | | SECOND LEG WIDTH | 0.750 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | CHAMFERED ENDS | | STYLE DESIGNATOR | DOUBLE ANGLE |
|
|