|
|
|
National Stock Number:
5340-01-178-5202
Federal Supply Class:
5340
National Item Identification Number:
011785202
Description:
BOOT,DUST AND MOISTURE SEAL
Detail:
A flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| 361237 | 25778 | SIERRA TECHNOLOGIES INC GARDEN CITY DIV | | M5423-14-08 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | M5423/14-08 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-B-5423/14 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-DTL-5423/14 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BASE WIDTH | 3.093 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 2.062 INCHES NOMINAL | | FIRST DISTANCE FROM MOUNTING HOLE CENTER TO BASE EDGE | 0.297 INCHES NOMINAL | | OVERALL HEIGHT | 0.875 INCHES NOMINAL | | OVERALL LENGTH | 2.656 INCHES NOMINAL | | OVERALL WIDTH | 3.718 INCHES NOMINAL | | MATERIAL THICKNESS | 0.050 INCHES NOMINAL | | MATERIAL | RUBBER BODY | | MOUNTING DEVICE QUANTITY | 8 | | MOUNTING METHOD | UNTHREADED HOLE | | SECOND DISTANCE FROM MOUNTING HOLE CENTER TO BASE EDGE | 0.313 INCHES NOMINAL | | SPECIFICATION/STANDARD DATA | 81349-MIL-B-5423/14 GOVERNMENT SPECIFICATION | | TEST DATA DOCUMENT | 81349-MIL-B-5423 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|