| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.500 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 1.375 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 2.000 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.865 INCHES NOMINAL |
| FIRST LEG SLOT WIDTH | 0.438 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.230 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| FIRST LEG WIDTH | 3.000 INCHES NOMINAL |
| FIRST LEG LENGTH | 3.560 INCHES MINIMUM AND 3.680 INCHES MAXIMUM |
| FIRST LEG SLOT LENGTH | 0.812 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | 1E65,FSCM 11083 MFR REF SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 1.750 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 1.312 INCHES NOMINAL |
| SECOND LEG END RADIUS | 0.620 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | THREE HOLES |
| SECOND LEG HOLE DIAMETER | 0.750 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN UPPER HOLE CENTERS ALONG WIDTH | 1.750 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.620 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.620 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.230 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| SECOND LEG WIDTH | 3.000 INCHES NOMINAL |
| SECOND LEG LENGTH | 3.932 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| STYLE DESIGNATOR | ANGLE |
| SPECIAL FEATURES | SECOND LEG IS TAPERED ON ONE SIDE ONLY |