| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.719 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.625 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.250 INCHES NOMINAL |
| FIRST LEG LENGTH | 2.625 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.531 INCHES NOMINAL |
| FIRST LEG THICKNESS | 0.250 INCHES NOMINAL |
| FIRST LEG WIDTH | 2.500 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD ALL MATERIAL RESPONSES OR ASTM A108 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A108 ASSN STD 5TH MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG LENGTH | 2.688 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG END WIDTH | 1.500 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | NO HOLE |
| SECOND LEG STYLE | ANGLE |
| SECOND LEG THICKNESS | 0.250 INCHES NOMINAL |
| SPECIAL FEATURES | SECOND LEG HAS A 1.281 IN. LG BY 0.562 IN. W CUTOUT |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | TT-P-636 FED SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | PRIMER |