| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.144 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.125 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 0.390 INCHES MINIMUM AND 0.398 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.123 INCHES MINIMUM AND 0.128 INCHES MAXIMUM |
| FIRST LEG WIDTH | 0.450 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.090 INCHES MINIMUM AND 0.098 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582,COND A ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 303 |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING HOLE TYPE | COUNTERSUNK AND PLAIN |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.220 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG HOLE DIAMETER | 0.1885 INCHES MINIMUM AND 0.1890 INCHES MAXIMUM |
| SECOND LEG LENGTH | 0.590 INCHES MINIMUM AND 0.598 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.125 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.090 INCHES MINIMUM AND 0.098 INCHES MAXIMUM |
| SECOND LEG WIDTH | 0.450 INCHES NOMINAL |
| SPECIAL FEATURES | FIRST LEG HAS ONE 0.0948 IN. MIN,0.0953 IN. MAX DIA HOLE |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | PASSIVATE |