|
|
|
National Stock Number:
5340-01-181-3530
Federal Supply Class:
5340
National Item Identification Number:
011813530
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 12283832 | 19200 | US ARMY ARDEC RDECOM | | 12283832 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 5.310 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.375 INCHES NOMINAL | | CENTER SECTION WIDTH | 5.000 INCHES NOMINAL | | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 3.500 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.361 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.750 INCHES NOMINAL | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG LENGTH | 2.000 INCHES NOMINAL | | FIRST LEG STYLE | SQUARE | | FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES | | FIRST LEG HOLE DIAMETER | 0.406 INCHES NOMINAL | | FIRST LEG THICKNESS | 0.375 INCHES NOMINAL | | FIRST LEG WIDTH | 5.000 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-741,CP 1015-1025 FED SPEC 1ST MATERIAL RESPONSE OR QQ-T-830 CP MT1010-MTX1020 FED SPEC 2ND MATERIAL RESPONSE | | MATERIAL | STEEL COMP 1010 OR STEEL COMP 1025 | | MOUNTING HOLE TYPE | PLAIN | | REINFORCEMENT METHOD | GUSSET | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG LENGTH | 2.875 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG HOLE ARRANGEMENT STYLE | NO HOLE | | SECOND LEG STYLE | SQUARE | | SECOND LEG THICKNESS | 0.375 INCHES NOMINAL | | SECOND LEG WIDTH | 5.000 INCHES NOMINAL | | SPECIAL FEATURES | KNUCKLE 2.19 LG 0.750 OD 0.375 ID1.41 FROM SECOND LEG END AND TRIANGULAR GUSSETS OUTSIDE SECOND LEG W/0.164-32UNC-2B HOLES | | STYLE DESIGNATOR | DOUBLE ANGLE | | SURFACE TREATMENT | CADMIUM |
|
|