| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 3.788 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.600 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.770 INCHES MINIMUM AND 0.830 INCHES MAXIMUM |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 3.850 INCHES MINIMUM AND 3.910 INCHES MAXIMUM |
| FIRST LEG STYLE | CHAMFERED ENDS |
| FIRST LEG END WIDTH | 4.440 INCHES MINIMUM AND 4.800 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.548 INCHES MINIMUM AND 0.578 INCHES MAXIMUM |
| FIRST LEG THICKNESS | 0.375 INCHES NOMINAL |
| FIRST LEG WIDTH | 5.320 INCHES MINIMUM AND 5.440 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/4,TH111 OR TH112 FED SPEC 1ST MATERIAL RESPONSE OR ASTM B221,TH111 OR TH112 ASSN STD 1ST MATERIAL RESPONSE OR QQ-A-200/5,TH111 OR TH112 FED SPEC 2ND MATERIAL RESPONSE OR ASTMB221,TH111 OR TH112 ASSN STD 2ND MATERIAL RESPONSE OR QQ-A-200/7,TH111 OR TH112 FED SPEC 3RD MATERIAL RESPONSE OR AST-221,TH111 OR TH112 ASSN STD 3RD MATERIAL RESPONSE OR QQ-A-200/8,T6 OR T62 OR T6510 OR T6511 FED SPEC 3RD MATERIAL RESPONSE OR ASTMB308,T6 ASSN STD 3RD MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 5083 OR ALUMINUM ALLOY 5086 OR ALUMINUM ALLOY 5456 OR ALUMINUM ALLOY 6061 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 3.000 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.750 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 2.500 INCHES NOMINAL |
| SECOND LEG LENGTH | 5.000 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.160 INCHES MINIMUM AND 1.220 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| SECOND LEG HOLE DIAMETER | 0.396 INCHES MINIMUM AND 0.416 INCHES MAXIMUM |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.375 INCHES NOMINAL |
| SECOND LEG WIDTH | 5.320 INCHES MINIMUM AND 5.440 INCHES MAXIMUM |
| SPECIAL FEATURES | FIRST LEG HAS A ROUNDED CUTOUT,RADIUS MINIMUM 1.32 INCHES MAXIMUM 1.44 INCHES.IN THE CENTER OF THE WIDTH DIMENSION |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-22750,TY 1 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | PLASTIC POLYAMIDE |