| FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | 3.625 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.250 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 3.675 INCHES NOMINAL |
| FIRST LEG LENGTH | 2.500 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 2.050 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | THREE HOLES |
| FIRST LEG HOLE DIAMETER | 0.169 INCHES MINIMUM AND 0.172 INCHES MAXIMUM |
| FIRST LEG THICKNESS | 0.250 INCHES NOMINAL |
| FIRST LEG WIDTH | 10.170 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/4,TEMPER H6 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 5083 |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 4.750 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.120 INCHES NOMINAL |
| SECOND LEG LENGTH | 2.500 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG SLOT LENGTH | 0.870 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.250 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | 2 SLOTS |
| SECOND LEG SLOT WIDTH | 0.440 INCHES NOMINAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.250 INCHES NOMINAL |
| SECOND LEG WIDTH | 11.300 INCHES NOMINAL |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-P-23377 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-C-46168 MIL SPEC 2ND TREATMENT RESPONSE |
| SURFACE TREATMENT | PRIMER EPOXY AND PLASTIC POLYURETHANE |