| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.100 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.085 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.150 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.050 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.067 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| FIRST LEG LENGTH | 0.300 INCHES NOMINAL |
| FIRST LEG WIDTH | 0.320 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-613,1/2H FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | COPPER ALLOY 260 |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.170 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.160 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG HOLE DIAMETER | 0.096 INCHES NOMINAL |
| SECOND LEG LENGTH | 0.530 INCHES NOMINAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.050 INCHES NOMINAL |
| SECOND LEG WIDTH | 0.320 INCHES NOMINAL |
| SPECIAL FEATURES | FIRST LEG HOLES CSK 0.115 IN. DIA,90.0 DEG; SECOND LEG CUTOUT 0.255-0.260 IN. ON INSIDE |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-T-10727,TY 1 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | TIN |