| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 50.0 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 13.0 MILLIMETERS NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 25.4 MILLIMETERS NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 10.0 MILLIMETERS NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 4.1 MILLIMETERS NOMINAL |
| FIRST LEG THICKNESS | 3.2 MILLIMETERS NOMINAL |
| FIRST LEG WIDTH | 70.0 MILLIMETERS NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/9 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6063 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 30.0 MILLIMETERS NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 10.4 MILLIMETERS NOMINAL |
| SECOND LEG LENGTH | 25.4 MILLIMETERS NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 20.0 MILLIMETERS NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 7.1 MILLIMETERS NOMINAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 3.2 MILLIMETERS NOMINAL |
| SECOND LEG WIDTH | 70.0 MILLIMETERS NOMINAL |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 CL3 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CHROMATE |