|
|
|
National Stock Number:
5340-01-193-4588
Federal Supply Class:
5340
National Item Identification Number:
011934588
Description:
HINGE,BUTT
Detail:
A hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
|
Manufacturer Information:
| A-A-5587-4 | 58536 | FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | FF-H-116 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS27968-4 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| PIN REMOVABILITY | NONREMOVABLE | | REVERSIBLE FEATURE | NOT INCLUDED | | KNUCKLE QUANTITY | 5 | | PERFORMANCE TYPE | NOT RATED | | MATERIAL AND LOCATION | BRASS, QQ-B-626, COMP 11 PIN OR | | STEEL, FED STD 66, COMP 302, 303, OR 304 PIN OR | | STEEL,FED STD 66,COMP 305,PIN AND | | STEEL,FED STD 66,LOW CARBON,BODY | | STYLE DESIGNATOR | BUTT | | SURFACE TREATMENT AND LOCATION | CADMIUM, QQ-P-416, TYPE 2, CLASS 2 OVERALL OR | | ZINC PLATE,MIL-C-81562,TY 2,CL 2,O/A OR | | ZINC AND CHROMATE,ASTM B633,TY 2,CL 2,O/A | | MATERIAL THICKNESS | 0.084 INCHES MINIMUM AND | | 0.094 INCHES MAXIMUM | | MOUNTING HOLE DIAMETER | 0.169 INCHES NOMINAL | | BODY WIDTH | 2.440 INCHES MINIMUM AND | | 2.560 INCHES MAXIMUM | | PIN CENTER TO BODY EDGE DISTANCE | 1.250 INCHES NOMINAL | | HINGE MOUNTING TYPE | FULL SURFACE | | KNUCKLE TYPE | FRICTION | | MOUNTING HOLE QUANTITY | 6 | | NONDEFINITIVE SPEC/STD DATA | 2171H TYPE | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 58536 | | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | A-A-5587-4 |
|
|