| FIRST LEG ANGLE | 89.5 DEGREES MINIMUM AND 92.0 DEGREES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.131 INCHES MINIMUM AND 0.151 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,CL 3 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 410 |
| MOUNTING HOLE TYPE | COUNTERSUNK AND PLAIN |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.143 INCHES MINIMUM AND 0.150 INCHES MAXIMUM |
| SECOND LEG LENGTH | 0.440 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.205 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.130 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| SECOND LEG WIDTH | 0.880 INCHES MINIMUM AND 0.940 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CORNER RADIUS |
| SPECIAL FEATURES | FIRST LEG IS RADIUSED |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT | PASSIVATE |