| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 3.100 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.430 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 1.000 INCHES NOMINAL |
| FIRST LEG SLOT LENGTH | 0.560 INCHES MINIMUM AND 0.590 INCHES MAXIMUM |
| FIRST LEG SLOT WIDTH | 0.340 INCHES MINIMUM AND 0.370 INCHES MAXIMUM |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.700 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | 2 SLOTS |
| FIRST LEG THICKNESS | 0.187 INCHES NOMINAL |
| FIRST LEG WIDTH | 5.500 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A36 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG HOLE ARRANGEMENT STYLE | 2 SLOTS |
| SECOND LEG LENGTH | 1.000 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 4.500 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.295 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.500 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.187 INCHES NOMINAL |
| SECOND LEG WIDTH | 5.500 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG SLOT LENGTH | 0.590 INCHES NOMINAL |
| SECOND LEG SLOT WIDTH | 0.340 INCHES MINIMUM AND 0.370 INCHES MAXIMUM |
| SECOND LEG STYLE | SQUARE |
| SPECIAL FEATURES | SLOTS ON 2ND LEG THROUGH EDGE |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-E-52798 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | ENAMEL |